SW-DC1000-G1
The UWB radar motherboard consists of transmitting and receiving antennas, radar chips, MCU, communication modules, and function buttons, and can be powered through a Type-C interface. Users only need to re-open the mold and install it to form a new product.
The UWB radar motherboard adopts a high precision pulse signal system, which can non-contact sense the presence of the human body with extremely high sensitivity in a set area, measure the breathing and heart rate of the human body, and generate analysis reports on sleep quality after long-term monitoring.
Model | SW-DC1000-G1 |
| Function | Respiratory rate, heart rate, body movement, in bed/out of bed, abnormal alarm, sleep report |
Electrical and mechanical parameters | |
Working voltage | 4-6V |
Working current | ≤300mA |
Power waste | ≤1.5W |
Working temperature | -20~+50℃ |
Storage temperature | -40~+80℃ |
Size | 72*66*13mm |
Interface | Type-C |
Communication mode | 4G |
Performance parameters | |
Monitoring scope | 0.5~3m |
Respiratory rate | 1~40/min |
Heart rate | 40~150/min |
Respiratory rate accuracy | 98% |
Heart rate accuracy | 90% |
Radio Frequency parameters | |
Working frequency band | 6.5~8.1GHz |
Average transmission power | -10dBm |
Antenna beamwidth | ±35° |
Antenna gain | 6dBi |